Stable Structure Australian Temporary Fence Tool-Free Assembly Weather Adaptable
Product Introduction:
This Australian Temporary Fence is engineered to meet the practical demands of diverse outdoor scenarios, fully complying with AS 4687-2007 standards. It focuses on structural stability, assembly convenience, and climate adaptability, adopting optimized frame connections and weather-resistant materials. Whether deployed in remote outback construction sites, rainy coastal zones, or busy urban renovation areas, it maintains consistent performance without compromising on safety or usability. Trusted by Australian infrastructure contractors, municipal maintenance teams, and emergency response units, it aligns with on-site operational needs and long-term outdoor use requirements.
Key Specifications:
| Specification |
Details |
| Standard Size |
2.1m (height) × 2.4m (length) |
| Optional Size |
1.8m × 2.4m |
| Wire Diameter |
3.5-4.0mm |
| Mesh Size |
50×100mm / 60×150mm (anti-climb) |
| Frame Tube |
Φ32mm steel, 1.6mm+ wall thickness |
| Base |
HDPE blow-molded (26kg when filled with concrete/water) |
| Surface Treatment |
Hot-dipped galvanized |
Key Advantages:
Structural Stability: Frame joints adopt integrated welding with reinforced gussets, dispersing external force evenly to avoid loosening; weighted bases with anti-slip texture enhance ground grip, even on gravel or wet surfaces.
Tool-Free Assembly: Pre-fitted snap joints allow panel connection by hand, no additional tools required—simplifying on-site operation and reducing installation time for large-scale projects.
Full Climate Adaptability: Resists extreme temperature fluctuations (-15℃ to 65℃) and prolonged moisture exposure, with no structural deformation in heavy rain, strong wind, or intense sunlight.
Low Loss Reuse: Robust material selection and solid craftsmanship ensure minimal wear after repeated disassembly and assembly, extending the service cycle for multi-project utilization.
Applications:
Ideal for remote infrastructure projects (outback road construction, rural bridge maintenance), urban renovation zones, emergency flood isolation areas, coastal landscape construction sites, temporary utility maintenance zones, and large-scale agricultural infrastructure partitioning.
Production Process:
Reinforced Joint Fabrication: Frame corners are welded with 2.5mm-thick steel gussets, and welding seams are smoothed and sealed to prevent moisture intrusion and enhance structural integrity.
Weather-Resistant Coating: After galvanization, a weather-resistant coating is applied via electrostatic spraying, forming a protective layer that resists UV radiation and moisture corrosion.
Base Structural Optimization: HDPE bases are molded with internal reinforced ribs to prevent cracking under pressure, and the bottom surface is textured to improve friction with the ground.
FAQ:
1.Can it withstand strong winds in outback areas?
Yes—tested to remain stable in wind speeds up to 100km/h with filled bases, suitable for open outback environments with frequent strong winds.
2.How long does it take to assemble a single panel?
A single person can complete panel connection in 8 seconds, and a 2-person team can set up 100 panels (240m) in 1.5 hours.
3.Will the surface coating peel off in intense sunlight?
The weather-resistant coating is formulated with UV stabilizers, tested to retain adhesion and integrity after 3,000 hours of continuous sunlight exposure.
4.Is it suitable for temporary use on uneven rural terrain?
Absolutely—the anti-slip base adapts to slight unevenness (up to 8° slope), and the stable frame structure avoids tilting on gravel or soil surfaces.
5.Can we customize the base weight for specific scenarios?
Yes—we offer base weight customization (25kg-35kg) to match different ground conditions, with a minimum order quantity of 100 panels for custom specifications.
Your message must be between 20-3,000 characters!
