SS Gas Liquid Filter Wire Mesh Demister Pad Mist Eliminator For Chemical Columns
Description
Wire mesh demister pads for liquid and gas seperation are fabricated from knitted materials with interlocking asymmetrical loops of metal or plastic with typical diameters being 0.1 – 0.3mm. By careful choice of wire diameter, NIHON MESH has produced demisters with extremely high free volumes (typically 98 – 99%) along with very high removal efficiency and low pressure drop.
Along with wire diameter and mesh density, another important parameter in design and operation of demisters is the vapor velocity. This can be controlled by careful selection of the eliminator area. Optimal area will depend on operating temperature, pressure and pressure drop. Under normal operating conditions 99% + removal efficiency can be achieved with a pressure drop of less than 250 Pascal.
Specification
| Type |
specification |
| Standard |
40-100 60-150 105-300 140-400 160-400 200-570 |
| High efficiency |
60-100 80-100 80-150 90-150 |
| 150-300 200-400 300-600 |
| Strong penetration |
20-100 30-150 70-400 100-600 170-560 |
| Damping |
33-30 38-40 20-40 26-40 30-40 |
| 30-50 48-50 30-60 30-80-50-120 |
Application
In air pollution control, to eliminate toxic mist from off gases, e.g. Sulphuric acid plants.
To reduce solvent losses in absorbers, scrubbers, distillation equipment e.g. Amine Treating Systems.
To minimize product losses in Kettles, Reboilers, Vacum Pans, Crystallizers and Evaporators. e.g. Sugar Crystallization
To eliminate entrainment in knock-out Drum and Receivers.
To eliminate entrainment that might damage compressors.
To supplement equipment like Carbon absorbers and Electrostatic precipitators.
In Refinery towers to prevent Carbon and Metal Entrainment to Downstream Catalytic Cracker and Reformer units.
Packing
1. Product are packed by Air Bubble Film. suitable for long distance transportation by sea,It can reduce abrasion when transport.
2. As customers' requirements
Delivery time
The product will be sent to you within 1-7 days after payment if in stock.
It will be take 7-15 workdays to produce if out of stock
About our company
1. Is your company a manufacturer or a trading company?
We are a manufacturer located in Anping County, China.
2. Do you have inport-export right?
Yes, we do. Our factory has been certificated as an import-export enterprise.
3. What is your payment mode?
30% in advance and 70% before delivery by T/T, WESTERN UNION, L/C or negotiated.
4. How about your packing?
We usually packed in plastic material inside and then wooden box outside.
5. How long is your delivery?
Usually 10-20 days after order confirmed, according the quantity ordered.
6. Is it sample available?
Yes, small pieces of sample are available in our company.
Your message must be between 20-3,000 characters!
