|
Product Details:
Payment & Shipping Terms:
|
| Material: | 302,304,304 L, 316,316L | Thickness: | 150-300mm Or On Request |
|---|---|---|---|
| Wire Diameter: | 0.08mm-0.30mm | Length: | 200mm-1500mm, As Your Request |
| Width: | 100mm-4000mm, As Your Request | Filter Rating: | 5%-99% |
| Product Name: | Mist Eliminator/Demister Pad | Usage: | Gas-liquid ,solid-liquid Separation |
| Brand Name: | Yuanhai | Feature: | High Porosity, Less Pressure Drops |
| High Light: | liquid and gas seperation mesh demister,seperation Wire Mesh Demister Pad,316L Wire Mesh Demister Pad |
||
Stainless Steel York Mesh 421 Demister Pad For Liquid And Gas Seperation
Description of Demister Pad
Knitted wire mesh demister pad is also known as mist eliminator or sprays. Knitted wire mesh demister pad is supplied in standard, high efficiency and high permeability. Demister Pads are essentially porous blankets of carefully knitted wire mesh designed and constructed to efficiently abate mist particles. Demister pad is mainly used to eliminate streams with diameter of more than 3μm to 5μm.
Knitted wire diameter used for the knitting directly affects flow, dirt holding capacity, pressure drop and cost. Knitted wire mesh demister pad is used to separate in the most efficient manner the very fine drops carried away by a gas or steam, either at a boiling stage, vacuum evaporation or bubbling of a liquid. In fact there are two phenomena, one mechanical and one physical, but no filtration at all since the size of the held drops has no relation with the infinitely greater size of the pore or open space. The head loss or gas passage resistance is practically imperceptible, however demisting can reach up to 99% efficiency. A demister reaches the highest efficiency when the speed of a gas or steam ranges between certain limits.
Product Specification of Demister Pad
(1) standard type
|
Wire Diameter dw(mm) |
Width Tolerance (mm) |
Density ρ(kg/m3) |
Surface Area α (m2/m3) |
Void Fraction ε |
||
| Flat Wire | Round Wire | ±20 | 150 | Flat Wire | Round Wire | 0.981 |
| 0.1*0.4 | 0.23 | 475 | 320 | |||
(2) High Penetration
|
Wire Diameter dw(mm) |
Width Tolerance (mm) |
Density ρ(kg/m3) |
Surface Area α(m2/m3) |
Void Fraction ε |
||
| Flat Wire | Round Wire | ±20 | 98 | Flat Wire | Round Wire | 0.9875 |
| 0.1*0.4 | 0.23 | 313 | 217 | |||
(3) High Efficiency
|
Wire Diameter dw(mm) |
Width Tolerance (mm) |
Density ρ(kg/m3) |
Surface Area α(m2/m3) |
Void Fraction ε |
||
| Flat Wire | Round Wire | ±20 | 182 | Flat Wire | Round Wire | 0.977 |
| 0.1*0.28 | 0.19 | 626 | 484 | |||
As for other specifications, we can supply the products according to customer's requirements.
Product Feature of Demister Pad
>High removal efficiency
>Negligible pressure drop, less than 25mm of water gauge
>No maintenance or service required
>No corrosion or temperature limitations
>Easily installed in existing vessels
>No limitation on size or shape.
Application of Demister Pad
*Elimination of toxic air pollutants
*Reduction of solvent losses in absorbers ,scrubbers and distillation equipment
*Optimization in kettles ,reboilers and crystallizers
*Elimination of entrainment
*Used in liquid -liquid systems
*Used as gaskets in cable, automobile and computer industry
*Gas-liquid ,solid-liquid separation
*Desalination plants
Installation of Demister Pad
The wire mesh demister is selected from the top-loading type and the bottom-loading type wire mesh demister: when the position of the hole is opened on the top of the wire mesh demister, or when there is no hole in the hole, the top-loading type wire mesh is selected. Defoamer; when the hole is opened under the wire mesh demister, the bottom-loading wire mesh demister is selected.
Product Show of Demister Pad
Contact Person: Amanda
Tel: 008618812186661
Fax: 86-318-7615090
