|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | 656 Fence Panel | Key Word: | Galvanized Fence |
|---|---|---|---|
| Wire Diameter: | 6/5/6 Mm | Mesh Size: | 50 X 200 Mm |
| Panel Height: | 1.23 M | Panel Width: | 2.5 M |
| Post Type: | Square 40 X 2.0 Mm | Surface Treatment: | Hot Dipped Galvanized |
| Color: | Zinc Silver | Material: | Q195 Low Carbon Steel |
| Zinc Layer: | 80-120 G/m2 | Certification: | ISO 9001 |
| Highlight: | Hot Dipped Galvanized Wire Fence,Rust Proof 656 Wire Fence,Double Loop Fence for Airport Boundary |
||
The 656 wire fence uses two 6 mm horizontal wires and one 5 mm vertical wire. Compared with the 868 panel the wire is lighter, so the finished bay weighs less and can be handled by two workers without lifting equipment. The welded node keeps every cell square, which matters on long airport boundary runs where a wavy top line is not acceptable. Panels are produced in 1.23 m height as standard, with 1.03 m, 1.53 m and 1.83 m available on the same drawing.
After welding, panels pass a hot dipped galvanizing bath at 450 degrees, so zinc covers the inside of every weld node and the cut wire ends. The zinc layer is controlled between 80 and 120 g/m2, which is the range most boundary projects specify for inland airfields. No paint or coating is added, so the surface stays silver and any damage is easy to inspect with the eye.
Shipping is done with panels nested on steel pallets and posts bundled separately. A 40HQ container takes about 600 panels of 2.5 x 1.23 m when posts and clamps are packed in the same load. Installation follows a simple line: set posts in concrete at 2.5 m centres, hang the panel on clamps, align the top line, then lock the bolts. A two person team normally completes 60 to 80 metres per day.
| Wire Diameter | 6 / 5 / 6 mm double horizontal wire |
| Mesh Opening | 50 x 200 mm |
| Panel Height | 1.23 m (also 1.03 / 1.53 / 1.83 m) |
| Panel Width | 2.5 m standard |
| Post Section | 40 x 2.0 mm square tube, 48 x 2.0 mm option |
| Surface Treatment | Hot dipped galvanized, zinc 80-120 g/m2, no coating |
| Color | Natural zinc silver |
| Panel Weight | about 15 kg per 2.5 x 1.23 m panel |
| Fixings | Steel clamps and M8 bolts |
| Standard | EN 10223-4, ISO 9001 factory audit |
Airport and airfield boundary runs where a low, open, rigid fence is required along drainage and service roads.
Highway and railway verges as a secondary containment line behind a crash barrier.
Industrial and warehouse yards needing a low cost boundary with clear sight lines.
Farm and agricultural perimeter where stock control and visibility both matter.
![]()
![]()
Contact Person: Amanda
Tel: 008618812186661
Fax: 86-318-7615090