|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | 3D Fence Panel | Key Word: | Railway Fence |
|---|---|---|---|
| Wire Diameter: | 8/6/8 Mm | Mesh Size: | 50 X 200 Mm |
| Panel Height: | 2.4 M | Panel Width: | 3.0 M |
| Post Type: | Rectangular 70 X 44 Mm | Surface Treatment: | Galvanized + Powder Coated |
| Color: | RAL 6005 / 9005 / 7035 | Material: | Q235 Steel Wire |
| V Bend: | 3 Bends Per Panel | Certification: | ISO 9001 |
| Highlight: | 3D Wire Fence Panel V Bend,Reinforced Impact Resistant Wire Fence,Double Loop Wire Fencing Railway Highway |
||
The 3D wire fence panel carries three horizontal V bends pressed into the mesh after welding. Each bend works as a stiffener, so a 3.0 m wide panel keeps its shape under wind load without a mid rail. On railway and highway verges this matters because the fence line is long, exposed and rarely inspected, and a sagging panel quickly becomes a maintenance item.
Panels are welded from 8/6/8 mm double horizontal wire on a 50 x 200 mm aperture, then hot dip galvanized and powder coated at 80 micron. The thicker coating is used here because road verges collect grit and salt from traffic. Post spacing is 3.0 m, which keeps the post count about 30 percent lower than a 2.5 m bay layout, a saving that shows up clearly on long corridor projects.
Fixing is done with bolt through clamps and M10 security bolts, so the panel can be removed for access without damaging the post line. For rail corridors the panels are normally set with the V bends facing the track, which gives a more rigid face toward impact. Panels are nested in packs of 20 for shipping, and a 40HQ container holds about 420 panels of 3.0 x 2.4 m.
| Wire Diameter | 8 / 6 / 8 mm double horizontal wire |
| Mesh Opening | 50 x 200 mm |
| Panel Height | 2.4 m (also 1.8 / 2.0 / 2.53 m) |
| Panel Width | 3.0 m with 3 V bends |
| Post Section | 70 x 44 mm rectangular tube, 2.0 mm wall |
| Surface Treatment | Hot dip galvanized plus polyester powder 80 micron |
| Color | RAL 6005 green, RAL 9005 black, RAL 7035 grey |
| Panel Weight | about 38 kg per 3.0 x 2.4 m panel |
| Fixings | Bolt through clamps, M10 security bolts |
| Standard | EN 10223-4, ISO 9001 factory audit |
Railway corridor boundary and cable route protection along the track bed.
Highway and motorway verge where a long rigid line is needed without mid rails.
Substation and utility compound outer boundary with anti climb accessories.
Industrial park road frontage where vehicle spray and wind load are high.
![]()
![]()
Contact Person: Amanda
Tel: 008618812186661
Fax: 86-318-7615090